It’s not uncommon for homeowners to avoid the crawl space because it’s dark, cold, and dirty. However, this area could be the source of some problems you experience around your home. With an experienced team that provides Everett crawl space insulation, these problems could be resolved.
A well-insulated crawl space helps you save money on utility bills. It contributes to good health, reduces toxins, and improves indoor air quality. However, insulation must be properly installed. Otherwise, it may not prevent the transfer of heat through the floor and walls of your home.
What Is a Crawl Space?
A crawl space is a small area under a house that can replace a basement. It is usually small enough that you can’t stand up, and it is unfinished. These spaces help hold the house up with special walls and supporting structures. They also create extra room for HVAC equipment, electrical wiring, and plumbing.
Houses built in wet places often have crawl spaces, which is why many homes in Everett have them. A crawl space keeps the house lifted off the ground and can prevent moisture from entering your home and damaging the walls.
Another reason your home may have a crawl space is because of cost. Installing a crawl space costs less than removing enough dirt for a full basement. Builders also don’t have to make the ground perfectly flat for a concrete floor, so having a crawl space is cheaper.
Why Do I Need Everett Crawl Space Insulation?
Many crawl spaces lack enough insulation or don’t have any at all. This mistake can lead to a home that is too hot or cold, depending on the season. If your home’s temperature fluctuates heavily, you’ll feel uncomfortable and pay higher energy bills over time.
If your crawl space isn’t insulated well, you may notice the presence of moisture and a musty smell when you enter. These conditions lead to mold, mildew, and wood rot growth. These issues will cause your home’s structure to deteriorate, making it weaker and lowering its value.
If outside air circulates into your home, it brings mold spores with it. Spores are what create the dirty, musty odor that infiltrates the room. These air spores might also cause or exacerbate health problems like asthma and breathing issues.
Types of Crawl Spaces
Crawl spaces can either be vented or unvented. A vented crawl space, the most common type, allows air to circulate from the outside. However, this circulation can cause many problems for homeowners. Moisture builds up, requiring many repairs over time.
An unvented crawl space does not mix indoor and outdoor air. These spaces are considered part of your home and have many advantages. However, they are less common, more time-consuming, and require more materials to build.
What Insulation Is Best for My Everett Crawl Space?
If you want the best Everett crawl space insulation, you need a qualified team of professionals to assess the area. Your crawl space has unique concerns, so it’s wise to consult with a pro. However, two types of insulation are most common: batt and roll insulation and foam board.
Batt and Roll Insulation
Batt and roll insulation is popular because it’s simple to install. Batts are precut sheets resembling a small blanket, and rolls are longer versions. Both easily slide into the space between wood frames and provide adequate insulation in your crawl space. Batt and roll insulation helps control temperatures and reduce your energy bills.
Foam Board Insulation
Foam board insulation has a dense foam core and can be laminated on each side. This type of insulation provides continuous protection from the Everett rain. It comes in a large sheet and more closely resembles plywood than insulation. This material is strong and supportive, so it doesn’t sag when placed into the cavity. Foam board is an ideal material for your Everett crawl space insulation.
Best Way to Insulate My Crawl Space
Many methods are available to insulate your crawl space. However, the best way to do so is to make the space an extension of your home, which can be done by including a vapor barrier.
Without a vapor barrier, the humid Everett weather can allow moisture to accumulate in your crawl space. Moisture contributes to mold growth, and you’ll need an insulation upgrade or repair sooner than expected.
Adding a vapor barrier to the crawl space helps protect the insulation. An experienced technician can place a thick plastic sheet along the ground to prevent moisture from rising. The plastic stops moisture from damaging your insulation.
Why You Should Schedule Professional Everett Crawl Space Insulation Installation
Although installing crawl space insulation can be a DIY project, hiring a professional will ensure the job is done right. If the material isn’t installed correctly, you’ll have multiple problems down the road.
Improperly installed insulation can leave gaps and spaces that allow moisture to seep into your house. That moisture can get thicker and cause mold growth in various parts of your crawl space, eventually affecting your floors.
Before adding new insulation, you need to start with a clean foundation. Removing any debris will clear the way for a fresh start. You’ll also need to address existing moisture problems and damage, including removing any mold growth or wood rot. Covering affected areas with insulation means more work later.
An experienced crawl space expert can help with these tasks. You’ll get quality customer care and the best results based on their knowledge and experience.
Trust a Team With Years of Experience
If you’ve decided it’s time to upgrade, replace, or finally invest in crawl space insulation, you need an experienced team for the job. Hiring a qualified professional will guarantee it’s properly installed and prevent immediate problems from occurring.
Leave the job to the licensed technicians from Attic Projects. With years of experience working with Everett homeowners, we’ll ensure your crawl space is properly cared for. Call us today to schedule a free estimate.
